Glue, frame or store a finished jigsawFinished your jigsaw? Here is how to keep it
5 minute read
Should you glue, frame or store a finished jigsaw?
Start with one question: will you want to do this jigsaw again? If the answer is yes, or you plan to pass it on, break it up and store it carefully. If the picture means something to you, or you are proud of finishing it, gluing and framing turns it into artwork for the wall.
Many people keep wooden jigsaws loose so they can enjoy them again, while larger 1000 piece cardboard jigsaws are a popular choice for gluing and framing, as the big finished picture works well on a wall.
How do you glue a jigsaw puzzle?
To glue a jigsaw, use a glue made for puzzles and follow the instructions on the product, as methods vary. The general steps are similar for most puzzle glues:
- Check the puzzle is complete, with no missing pieces or gaps.
- Slide a sheet of greaseproof paper under the puzzle so the glue does not stick it to your table.
- Press the puzzle flat with a rolling pin or the flat of your hand so every piece sits level.
- Spread a thin, even layer of puzzle glue over the front, working it into the joins with a card spreader or soft brush.
- Leave it to dry fully, for as long as the product recommends, before moving or framing it.
Can you glue a jigsaw from the back instead?
Yes. If you would rather not put glue on the picture, adhesive puzzle mounting sheets are applied to the back of the jigsaw instead and leave the front untouched. You will need to flip the puzzle carefully, usually by sandwiching it between two boards, so take your time and ask for a second pair of hands.
How do you frame a finished jigsaw puzzle?
Measure the finished jigsaw first, then choose a frame of the same size, or a larger frame with a mount cut to fit. A jigsaw is thicker than a paper print, so check the frame is deep enough for the puzzle and a backing board. Hanging it away from strong direct sunlight will help the colours last.
Greenwood 1000 piece puzzles, including Nostalgia by Kevin Walsh and Michael Howley Soft Touch, measure 70 x 50 cm, a widely available frame size. These are the finished sizes to measure for across the Greenwood range:
- Greenwood 1000 piece puzzles: 70 x 50 cm.
- Greenwood square wooden puzzles, 49, 100 and 210 pieces: 280 x 280 mm.
- Greenwood square wooden puzzles, 400 pieces: 400 x 400 mm.
- Greenwood landscape wooden puzzles, 48, 100 and 256 pieces: 390 x 280 mm.
- Greenwood landscape wooden puzzles, 500 pieces: 585 x 420 mm.
How do you store a jigsaw puzzle so no pieces go missing?
Break the jigsaw up gently over the table rather than lifting big sections in mid-air, so pieces do not escape onto the floor. Put the pieces in a bag before they go back in the box, so a knock or a split corner will not scatter them.
Store jigsaw boxes flat, somewhere dry and away from damp, heat and direct sunlight. Lofts and garages can be damp or change temperature a lot, so an indoor cupboard or shelf is usually a better home.
Greenwood wooden jigsaw puzzles make this easy, as they come with a cream cotton storage bag and a luxury magnetic gift box, plus a full-colour reference print so you do not need the box lid to see the picture.
Can you pass on or swap a finished jigsaw?
Passing on or swapping a finished jigsaw is a lovely way to keep puzzles in use. Check the puzzle is complete before you break it up, and pop a note in the box if any pieces are missing so the next person knows.
Swapping puzzles with friends, family or a local group lets you try new pictures without filling your shelves. When you are ready for something new of your own, browse the full range.
Quick questions
Can you unglue a jigsaw puzzle once it has been glued?
Usually not. Most puzzle glues are designed to hold the pieces together permanently, and trying to separate them tends to damage the picture. If you might want to do the jigsaw again, consider framing it unglued on a backing board under glass, or storing it loose instead.
Can you frame a jigsaw without glue?
Yes, you can frame a jigsaw without glue by sliding it carefully onto a backing board and placing it in a frame with glass, which holds the pieces in place. It takes a steady hand, but it means you can take the puzzle out and do it again later.
Should you glue a wooden jigsaw puzzle?
You can glue a wooden jigsaw, but many owners prefer not to, because they enjoy doing wooden puzzles again. If you want to display one, a frame with glass and a backing board can hold the pieces without glue, keeping the puzzle ready to enjoy in future.
What size frame do you need for a 1000 piece jigsaw?
The frame size depends on the puzzle, as 1000 piece jigsaws vary between brands, so measure your finished puzzle first. Greenwood 1000 piece puzzles, including Nostalgia by Kevin Walsh and Michael Howley Soft Touch, measure 70 x 50 cm, which is a widely available frame size.
How should you store jigsaw puzzles long term?
Store jigsaw puzzles flat in their boxes, with the pieces in a bag, somewhere dry and away from damp, heat and sunlight. An indoor cupboard or shelf is usually better than a loft or garage, where damp and temperature changes can warp or mark the pieces.







